Reference

TR13

Technical details

It has a straight stem with a length of 1.38 inches.

It has a base width of 2.20 inches.

It has a stem diameter of 0.46 inches.

It can handle an inflation pressure of 60 psi.

It should be used for a 0.445 or 0.631-inch rim hole.

It is also available with nut and bushing for 0.618 or .633 rim holes.

Ideal for;

They are great for industrial tubes, light trucks, passenger and front farms. However, you should never use them with liquid ballast.

TR15

Technical details

It has a straight stem length of 1.38 inches.

It has a base diameter of 2.20 inches.

It has a stem diameter of 0.65 inches.

It can handle an inflation pressure of 60 psi.

It should be used in a 0.618 and 0.633-inch rim hole.

Ideal for;

They are great for industrial tubes, passenger, light trucks and front farm tractors. However, you should never use them with liquid ballast

TR 300

Technical Details

It comes with a straight stem with a length of 1.76 inches.

It has a base diameter of 2.28 inches.

It has a stem diameter of 0.61 inches.

It should be used on 0.618 or 0.633-inch rim hole.

It works with a maximum inflation pressure of 150psi.

Ideal for;

This valve stem is ideal for use in tubeless tires used in buses and trucks.

TR JS2

Technical Details

It comes with a stem length of 1.02 inches from the base with a bend at 70 degrees.

Its base diameter is 2.20 inches.

It comes with a stem diameter of 1.31 inches.

It works perfectly with the 0.445 or the 0.631 rim holes.

It is not ideal for use with liquid ballast.

It has a maximum inflation pressure of 60psi.

Ideal For:

This valve stem is ideal for use in industrial trucks and trailers.

TR 22O 

Technical Details

It is designed with a stem length of 1.19 inches.

It works perfectly for a 0.625-inch rim hole.

It has a maximum inflation pressure of 150 psi.

It can be used with liquid ballast.

It is usually held in place with the LN10 Rim nut.

Ideal For:

You will find these tire tubes most useful with road graders. 

R135

Technical Details

It is designed with a stem length of 2.63 inches.

It has a base diameter of 2.24 inches.

Its stem diameter is 0.61 inches.

It is a hand bendable rubber covered valve.

It works perfectly for 0.625-inch rim holes. 

It can handle a pressure of up to 100psi.

Ideal For:

You will find these valves best for light trucks, farm implements, industrial tubes.

TR4

Technical details

It is designed with a stem length from the base of 1.33 inches.

It has a base diameter of 1.77 inches.

It is ideal for rim holes of 0.333 inches and 0.453 inches.

It can handle a pressure of 60psi.

It should not be used with liquid fill.

 It's metal stem comes with external threads.

Each valve comes with two lock nuts 

Ideal For:

You will find these valves ideal for AVT sizes and LG applications.

TR6

Technical details

It is designed with a stem length of 1.36 inches.

It has a base diameter of 1.77 inches.

It is ideal for rim holes of 0.333 inches and 0.453 inches.

It can handle a pressure of 60psi.

It should not be used with liquid fill.

It's metal stem comes with external threads.

Each valve comes with two lock nuts 

Ideal For:

You will find these valves ideal for AVT sizes and LG applications.

TR150

Technical Details

It comes with a stem length of 3.69 inches from the base.

It has a base diameter of 2.24 inches.

It has a stem diameter of 0.61 inches.

It can handle a maximum pressure of 100psi.

It is a hand bendable rubber covered valve.

It works well with rim holes of 0.625 inches.

Ideal For:

You will find these valves most useful for front tractor tires, industrial tubes, and light trucks.

TR 87

Technical details

It comes with a stem length of 0.59 inches before it bends at 90 degrees.

Its stem length from the bend is 1.3 inches.

It has a base diameter of 1.75 inches.

It is intended for use with liquid ballast.

It works well with rim holes of 0.445 or 0.631 inches.

Ideal for:

It is great for a wide range of industrial applications. 

JS 89

Technical details

It is normally bent at 90 degrees.

It comes with a stem height of 0.49 inches

It is designed with a base diameter of 2.20 inches

It has a stem diameter of 2.01 inches.

It works well with rim holes with a diameter of 0.445 or 0.631 inches.

Ideal for;

It is mostly ideal for industrial applications.

TR 440/TR75A

Technical details

The TR 440 has a height of 3.35 inches while the TR75A has a height of 3.74 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 2.99 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees.

 Ideal for: 

You will find them useful in medium, light and heavy trucks. 

TR 441/TR 177 A 

Technical details

The full height of the TR 177A is 4.49 inches while the TR 441 has a length of 4.13 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 3.74 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees. 

Ideal for: 

You will find the valve stems useful in medium, light and heavy trucks.

TR 442/TR 77A

Technical details

The TR 442 has a full height of 4.53 inches while the TR 77A has a length of 4.88 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 4.13 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees. 

Ideal for: 

You will find the most useful in medium, light and heavy trucks.

TR443/TR 175A

Technical details

The TR 443 has a length of 4.92 inches and the TR 175 A has a full height of 5.28 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 4.53 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees.

Ideal for: 

You will find the valves most useful in medium, light and heavy trucks.

TR444/TR 78A

Technical details

The TR 444 has a length of 5.51 inches while the TR 78A has a full height of 5.75 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 5 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees. 

Ideal for: 

You will find the valves most useful for medium, light and heavy trucks applications.

TR445/TR 179 A

Technical details

The TR 179 A has a full height of 6.30 inches while the TR 445 has a length of 6.10 inches.

They both have a height to bend of 0.94 inches.

They both have a base width of 3.24 inches.

They both have a stem diameter of 5.55 inches.

They can handle a maximum pressure of up to 150 psi.

They are usually bent at an angle of 85 degrees. 

Ideal for: 

You will find them most useful in medium, light and heavy trucks.

TR 218 A

Technical Details

It comes with a stem length of 0.81 inches.

It has a base diameter of 2.5 inches.

It is designed with a stem diameter of 0.64 inches.

It can handle a maximum inflation pressure of 150 psi.

It works perfectly with 0.625-inch rim holes.

It can be used with liquid ballast.  

 Ideal for:

You will find this valve stems ideal for lawn and garden, road graders, front tractor and back tractor.

TR 220 A

Technical Details

It comes with a stem length of 1.18 inches.

It has a base diameter of 2.5 inches.

It is designed with a stem diameter of 0.64 inches.

It can handle a maximum inflation pressure of 150 psi.

It works perfectly with 0.625-inch rim holes.

It can be used with liquid ballast.  

 Ideal for:

You will find this valve stems ideal for road grader applications. 

 J1157C

Technical details

It comes with a height to bend of 1.38 inches.

It has bend to tip of 4.13 inches.

Its base width is 1.25 inches.

Its bend is at an angle of 88 degrees.

It works perfectly with SP1000.

Ideal For;

It is best used for off the road applications.